Closed Topics: HELP! I need a button device to make a phone ring

Print Page | Close Window

HELP! I need a button device to make a phone ring

Printed From: Community Theater Green Room
Category: Archives
Forum Name: Closed Topics
Forum Discription: Uncategorized posts from the previous version of our discussion board. For browsing and searching.
URL: http://www.communitytheater.org/forum/forum_posts.asp?TID=311
Printed Date: 6/01/25 at 4:48pm
Software Version: Web Wiz Forums 8.05 - http://www.webwizforums.com

Topic: HELP! I need a button device to make a phone ring

Posted By: Guests
Subject: HELP! I need a button device to make a phone ring
Date Posted: 1/20/04 at 5:57pm

i need to make a phone ring on command. i know there is a mechanical/electrical device out there that allows it i just need the plans!!!!!

Replies:

Posted By: Guests
Date Posted: 1/20/04 at 6:51pm

Any hardware store (i.e. home depot, lowes, etc.) has what you are looking for. We bought a plain push button and attached it to a door bell (you can buy door bells that ring in various tones) and then attached it to a board. We have a board that does phone rings, door bells, gongs, and knocks.

It's just a matter of assembling it all together...

Alan Saunders
www.centerstageplayers.com

Posted By: Guests
Date Posted: 1/21/04 at 10:04am

If you want to spend a little money and have some thing for a long time you might want to invest in a ring generator. I love mine. I've had it for years and used it every show that has a phone in it. It is a Loraine model RT3.(They probably have better upgraded models now). My husband connected a phone jack, push button momentary switch and a terminal strip and mounted everything on a portable board that connects into wall outlet. You can connect any number of phones to it. I just change which phone is going to ring by selecting the right connector to slip into phone jack. You can use any working telephone, run regular phone wire, connect it and the phone will ring. It will stop ringing when the receiver is picked up. No more worries about bad timing with the phone! I just used it in :1940's Radio Hour". I had the phone in the office & the pay phone in the hall connected to it. I was lucky enough to get original phones from the 1940s and the effect of the original phones ringing was wonderful. My husband just did a quick search on e-bay and said that if you type in ring generator there a bunch of them really cheap. I wish there was an e-bay when I bought mine. I think I paid about $125 about 15 years ago. It was worth every penny though.

Linda

Posted By: bminter
Date Posted: 2/05/04 at 8:31pm

Go here for stage techs ringmaster....

http://www.stagetechnology.com/catalog.cfm - http://www.stagetechnology.com/catalog.cfm

Posted By: Guests
Date Posted: 2/14/04 at 2:27am

Your best bet is probably the hardware suggestion- get a buzzer, get a battery and nail them to a board.

If you want to make the phone on stage ring, there is a cheap way to do it if the phone itself works. All it takes to make the ringer ina phone ring is about 45-50 volts DC.

Get a modular phone cord long enoght to reach the phone on stage cut the jack off one end. When you look at the jack you can see it has 4 little wires in it, each a differnet color. The outer two do nothing, the inner two are the ones you want. Get 4, 12V lantern batteries and wire them up in series (- to +) and put a puch button in the circuit. Hook the ohone wires in the circuit and you should be good to go.

Some info on the phone system (this is all US relevent- other countries use different systems). The phone company uses about 9-12 volts for the signal when you are talking. To ake the phone ring it jumps up to somewhere between 45 and 150 volts. A regular old fashioned desk phone only needs about 40-45V. If you have a fancy new phone look on the bottom. Somewhere it may give you a REN (Ring Equivalency Number)- this is how many standard phone ringers that particular phone is worth. A regular cheap phone is REN 1. Some fancy phone, or really load ringers may be REN 3 or more. If the REN is higher it may take more voltage to make it ring, so this system is only good with REN1 phones. The phones use high volts (48-150), but very very low amps (mA range).

Safety. This is a very simple circuit. But if you think it sounds complex get someone who knows what they are doing! Don't suggest trying car batteries because they have a lot of amps and would be dangerous. stick to lantern batteries or regular flashlight batteries. May want to put a fuse in the circuit too.

Posted By: Guests
Date Posted: 2/15/04 at 6:20am

Sorry, BuddyC, but working telephones do NOT ring on DC. The TALK circuit is powered by approximately 46VDC but the RINGER needs 17 - 50 Hz (the standard is 20Hz for US phones) at around 45 to 90VAC. (The higher voltage being preferrable with the old mechanical ringer phones.) I just thought it should be clarified after the BuddyC posting.

Posted By: Guests
Date Posted: 7/31/04 at 2:16am

Originally posted by bminter

Go here for stage techs ringmaster....

http://www.ryebooks.com - http://www.ryebooks.com